Table of Contents
Advertisement
Chapter 2
- 2 screws (TP) [2]
- 2 screws (binding) [3]
[1]
[3]
F-2-111
14) Detach the mounting support plate (right) [1].
- 2 screws [2]
F-2-112
15) Remove the join (upper) [1].
- 2 Screws [2]
- 2 Hook area [3]
F-2-113
16) Remove the screw [2] at the waste toner feed pipe [1].
2-28
[2]
[3]
[2]
[1]
F-2-114
17) Lift the Waste Toner Connecting Pipe [1], and remove the joint (lower)
[2].
F-2-115
CAUTION: Points to Note at Installation
1) Be sure to align the cut-off [1] of the Waste Toner Connecting Pipe with
the protrusion [2] of the cap when installing.
2) Be sure to install the joint (lower) [3] between the Waste Toner
Connecting Pipe [1] and the plate [2].
[1]
[2]
Advertisement
Table of Contents
