Table of Contents
Advertisement
[B]
[1]
[3]
3) Fit the pressure shaft [1] of the pres sure plate in the hole [2] of the external
heating unit and fix them.
[1]
[2]
4) Attach the external heating pressure plate [2] with the 2 screws [1].
CAUTION:
- Never turn the screw [3] (for fixing the external heating pressure shaft).
[2]
[3]
[1]
[2]
[1]
[1]
[1]
[2]
- Make sure to tighten the screw [1] until it stops.
- Check to see that External heater harness protective sheet [1] has been
attached as shown in the following figure.
- Be careful not to fold the protective sheet [1].
[1]
Chapter 2
[3]
[1]
2-69
Advertisement
Table of Contents
