Removing The Deck Pickup/Feed Roller; Points To Note When Mounting The Deck Pickup/Feed Roller; Deck Separation Roller; Removing The Deck Separation Roller - Canon Paper Deck-V1 Service Manual

Chapter 3
When mounting the deck pickup unit [3], be sure
to tighten the 3 screws shown in the figure first.
F-3-79
3.4.3.6 Removing the Deck
Pickup/Feed Roller
1) Remove the resin ring [1], and detach the deck
pickup/feed roller [2] and the drive belt [3] toward
the front.
[2]
[1]
F-3-80
3.4.3.7 Points to Note When
Mounting the Deck Pickup/
Feed Roller
When mounting the deck pickup/feed roller [1], be
sure so that the belt pulley [2] is to the front of the
machine.
3-22
[3]
Screws
0009-2137
[3]
0009-2138
[2]
F-3-81

3.4.4 Deck Separation Roller

3.4.4.1 Removing the Deck
Separation Roller
1) Detach the deck from its host machine; then,
remove the 2 screws [1], and detach the separation
roller support plate [2].
F-3-82
2) Detach the pickup roller [1] from the holder [2].
(snap-on)
F-3-83
[1]
0009-2139
[1]
[2]
[2]
[1]