Middle Deck Unit - Canon iPR C7010VP Series Installation Manual

F-2-376
5) Remove the gear cover [1].
- 1 screw [2]
[2]
F-2-377
6) Move the harness [1] to the top of the deck lifter motor unit [2].
F-2-378
7) Remove the deck lifter motor unit [1].
- 4 screws [2]
[2] [1]
[1]
[1]
[2]
F-2-379
CAUTION:
After replacing the deck lifter motor unit, be sure not to forget to remove the
screwdriver that keeps the tension of the lifter wire.
If the screwdriver is difficult to remove, move the lifter drive shaft in the
backlash of the gear with the driver.

2.2.2 Middle Deck Unit

2.2.2.1 Middle Deck Unit

imagePRESS C6010 / im agePRESS C7010VP / imagePRESS C60 10VP /
imagePRESS C7010VP FS / image PRESS C7010V P PSU / imagePRE SS
C6010VP FS / imagePRESS C6010VP PSU / imagePRESS C6010 FS / im-
agePRESS C6010 PSU
[1]
F-2-380
No. Name of part
[1] Middle deck lifter motor (M703)
1) Remove the middle deck unit.
Chapter 2
[1]
[2]
[2]
[1]
[2]
T-2-3
Qty.
1
0026-5006
2-89