Table of Contents
Advertisement
Chapter 2
1) Remove the Main Statio n Duplex Feed Unit 3. Refer to "C hapter 8 Re-
moving the Main Station Duplex Feed Unit 3" in the Service Manual.
[1]
F-2-241
2) Detach the guide plate (front) [1].
- 2 screws [2]
[2]
F-2-242
3) Remove the motor assembly [1.
- 1 belt [2]
- 1 connector [3]
- 3 screws [4]
CAUTION:
Be sure not to lose the unfixed bushing [1].
[4]
[3]
F-2-243
4) Free the harness from the edge saddle [1].
2-54
[1]
[1]
[1]
[2]
[1]
F-2-244
5) Remove the stepped screw [1].
[1]
F-2-245
6) Open the main station duplexing feed unit 3 (lower) while pushing the re-
lease plate [1].
[1]
F-2-246
7) Remove the main station duplexing feed unit 3 (lower) [1] in the direction
of the arrow.
CAUTION:
Be sure not to lose the unfixed bushing [1].
[1]
[2]
Advertisement
Table of Contents
