Canon iPR C7010VP Series Installation Manual page 103

Chapter 2
- 5 screws [2]
F-2-259
2) Remove the left deck path merger unit [1].
- 1 connector [2]
- 1 screw [3]
[3]
F-2-260
3) Detach the left deck path merger positioning plate [1].
- 3 screws [2]
[2] [1]
F-2-261
4) Remove the left deck merger roller [1].
- 4 E-rings [2]
- 2 bearings [3]
- 1 dowel pin [4]
- 1 gear [5]
2-58
[3] [1]
[2]
[1]
- 2 screws [6]
F-2-262
CAUTION:
When replacing, be sure to apply grease around the inner diameter of the
bearing.
(Super lube grease)
5) Remove the Left Deck Merging Roller [1].
- 4 E-rings [2]
- 2 Bearings [3]
- 1 Plate [4]
F-2-263
CAUTION:
When replacing, be sure to apply grease around the inner diameter of the
bearing.
(Super lube grease)