Changing Springs In The Pressure Exchange Rotor - Danfoss iSave 40 Series Operation Manual

Hide thumbs Also See for iSave 40 Series:

Table of Contents

Operation guide | iSave 40

10. Changing springs in

the pressure exchange

rotor

Small shaft diameter: No distance.

It is basically not necessary to change the

springs in the rotor. If needed, follow the

guidelines below:

9.1

Disassembling

Using the tool provided, press down the

retainer and remove/cut the O-ring, and

remove retainer.

180R9239 | AQ299555093252en-001601 | iSave 40 | 09.2022

Large shaft diameter: Distance 4-5 mm.

Replace the springs in the rotor.

Table of Contents

Chapters

Table of Contents

Do you have a question about the iSave 40 Series and is the answer not in the manual?

180f7001 180f7003 180f7004 180f7005 180f7011