Centre Of Mass; Storage; Outdoor Storage - Danfoss iSave 40 Series Operation Manual

Operation guide | iSave 40
Do not lift the whole iSave in the lifting eyes on
the electric motor.

4.3.3 Centre of mass

4.4 Storage

Each iSave is tested before shipment and
therefore holds water.
Storage temperature:
-40 °C to +70 °C (-40 °F to 158 °F) – provided that
the iSave is drained of fluid and stored "plugged".
Frost protection is required if the iSave is not
completely drained of fluid and at temperatures
below 1°C. Danfoss recommends using
DOWFROST from DOW Chemical Company or
Chillsafe mono propylene glycol from Arco
Chemical Company.
180R9239 | AQ299555093252en-001601 | iSave 40 | 09.2022
If the iSave is protected against frost, the storage
temperature can be:
-40°C to +70°C (-40°F to 158°F)
• The iSave is NOT delivered frostpro-
tected from the factory.
• Only remove caps from the openings of
the iSave at the time of installation.

4.5 Outdoor Storage

• For outdoor storage cover the iSave (set)
with waterproof material.
Exploded view
iSave
Bolt - 4x70 ±7 Nm
Washer
Driver coupling
Coupling element
11