Firmware Upgrade Screen - ZyXEL Communications WX3310-B0 User Manual

Table 26 Maintenance > Time (continued)
LABEL
Start Date
End Date
Apply
Cancel

13.5 Firmware Upgrade Screen

Find firmware at
extension, e.g., "WX3310.bin". The upload process uses HTTP (Hypertext Transfer Protocol) and may take
up to two minutes. After a successful upload, the system will reboot.
Click Maintenance > Firmware Upgrade. Follow the instructions in this screen to upload firmware to your
WX3310.
Figure 51 Maintenance > Firmware Upgrade
Chapter 13 Maintenance
DESCRIPTION
Configure the day and time when Daylight Saving Time starts if you selected Daylight
Saving Enable. The at field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the second Sunday of
March. Each time zone in the United States starts using Daylight Saving Time at 2 A.M. local
time. So in the United States you would select Second, Sunday, March and select 2 in the at
field.
Daylight Saving Time starts in the European Union on the last Sunday of March. All of the
time zones in the European Union start using Daylight Saving Time at the same moment (1
A.M. GMT or UTC). So in the European Union you would select Last, Sunday, March. The time
you select in the at field depends on your time zone. In Germany for instance, you would
select 2 because Germany's time zone is one hour ahead of GMT or UTC (GMT+1).
Configure the day and time when Daylight Saving Time ends if you selected Daylight
Saving Enable. The at field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time ends in the United States on the first Sunday of November. Each time
zone in the United States stops using Daylight Saving Time at 2 A.M. local time. So in the
United States you would select First, Sunday, November and select 2 in the at field.
Daylight Saving Time ends in the European Union on the last Sunday of October. All of the
time zones in the European Union stop using Daylight Saving Time at the same moment (1
A.M. GMT or UTC). So in the European Union you would select Last, Sunday, October. The
time you select in the at field depends on your time zone. In Germany for instance, you
would select 2 because Germany's time zone is one hour ahead of GMT or UTC (GMT+1).
Click Apply to save your changes.
Click Cancel to begin configuring this screen afresh.
www.zyxel.com in a file that (usually) uses the system model name with a "*.bin"
WX3310-B0 User's Guide
83