Reference Manual
00809-0100-4026, Rev KC
7.6
Backing up the transmitter configuration
Use this RRM option to make a backup copy of the configuration parameters in the transmitter database.
The backup file can be used to restore the transmitter configuration. It can also be used for configuration
of a transmitter in a similar application. Parameters in the saved file can be uploaded directly to the new
device. It is recommended to store the transmitter configuration in a backup file.
The backup function is available from the Device menu in RRM.
To make a backup copy of the configuration parameters:
1. From the Device menu, select the Backup Config to File option.
2. Browse to the desired directory.
3. Enter a name for the backup file and select the Save button, so the transmitter configuration is
stored. The backup file can be used at a later stage to restore an accidentally changed configuration.
The backup file can also be used to quickly configure transmitters installed on similar tanks. To upload
a backup configuration, select the Upload Config to Device option from the Device menu.
The backup file can be viewed using the Backup File Reader installed with the RRM software:
4. The backup file can also be viewed as a text file in a word processing program such as Notepad:
See
"Configuration report" on page 175
Service and Troubleshooting
for further information on viewing backup files.
Service and Troubleshooting
October 2018
Backup File
Reader
173