Emerson Rosemount 5402 Reference Manual page 132

Configuration
October 2018
Device properties
3. Check the device properties.
The first window in the Configuration Wizard presents general information that is stored in the
transmitter database, such as device model, serial number, antenna type, communication protocol,
and device address. Verify the information matches the ordering information.
Device information
4. The Tag, Message, Descriptor, and Date information is entered in this window. This information is not required for
the operation of the transmitter and may be left out, if desired.
HART command: [2, 2, 1].
118
Reference Manual
00809-0100-4026, Rev KC
Configuration