Viewing Measurement Data In Rrm - Emerson Rosemount 5402 Reference Manual

Operation
October 2018
LCD display parameters
Table 6-1. LCD Display Parameters and Presentation on Display
Parameter
Level
Distance
Level Rate
Signal Strength
Volume
Internal Temperature
AOut Current
Percent of Range
Comm Quality
Signal Quality
Surface/Noise
Margin
6.2.3

Viewing measurement data in RRM

To view measurements, such as level, signal strength, etc. in RRM, select the Tools > Device Display
option and select the Level tab:
Figure 6-4. Presentation of Measurement Data in RRM
154
Presentation on
display Description
LVL Product level
DST Distance from the upper reference point to the product
surface
LR The speed of level movement up or down
AMP The signal amplitude of the surface echo
Only measurement Total product volume
unit is shown
ITEMP Temperature inside the transmitter housing
ANOUT Analog Output 4 -20 mA current
% RNG Level value in percent of total measurement range
COM Q Digital communication signal quality
SIG Q The signal quality
SNM The relationship between the surface peak amplitude and the
strongest noise peak amplitude
Reference Manual
00809-0100-4026, Rev KC
Operation