Loading And Securing Load; General Information About Loading - PRONAR T663/4 Operator's Manual

SECTION 4

4.4 LOADING AND SECURING LOAD

Secure the load with tarpaulin cover. The load should be covered whenever trailer moves on
public roads.
Load protection with tarpaulin cover
While standing on the fenced platform, unroll the tarpaulin cover (2) using
crank (1).
Attach all pull straps (4) to clamps (3) on the trailer load box.
Pull tarpaulin cover from the right side.
Pull tarpaulin cover to the front and finally to the rear wall of the load box.
FIGURE 4.3 Tarpaulin cover
(1) strip with crank, (2) tarpaulin cover, (3) clamp, (4) pull strap

4.4.1 GENERAL INFORMATION ABOUT LOADING

Before beginning loading make certain that the load box side walls and slide gate are
properly closed and secured. The trailer must be positioned to travel forwards and be hitched
to the tractor. Loading should only take place, when trailer is placed on flat level surface and
hitched to tractor. If load does not exert pressure on the side walls or extension walls, the
linking cable can be disengaged. In other cases it must be installed in cable release
4.11
Pronar T663/4 T663/4 SILO