Safety Rules For Operating Hydraulic And Pneumatic Systems - PRONAR T672ECO User Manual

Safety of use
2.3 SAFETY RULES FOR OPERATING HYDRAULIC AND
PNEUMATIC SYSTEMS
• The hydraulic and pneumatic systems
are under high pressure during
operation.
• Regularly check the technical con-
dition of connections and hydraulic
and pneumatic hoses. The trailer
may not be operated with leaking
installations.
• In the event of a failure of the hy-
draulic or pneumatic system, the
trailer should be decommissioned
until the failure is removed.
• Repairs and replacements of pneu-
matic and hydraulic system elements
should be entrusted to appropriately
qualified persons.
• When connecting the hydraulic con-
duits to the tractor, make sure that the
tractor hydraulic system and trailer
are not under pressure. If necessary,
reduce the residual pressure of the
system.
• In the event of injuries being caused
by pressurized hydraulic oil, contact
a doctor immediately. Hydraulic oil
can penetrate the skin and cause in-
fection. If the oil gets into the eyes,
rinse with plenty of water and if irri-
tation occurs, contact a doctor. In the
event of contact of oil with skin, wash
the area of contact with water and
soap. Do not use organic solvents
(petrol, kerosene).
• Use hydraulic oil recommended by
the manufacturer.
• After changing the hydraulic oil, the
used oil must be disposed. Used oil or
oil which has lost its properties should
be stored in original containers or re-
placement packaging resistant to hy-
drocarbons. Replacement containers
must be accurately described and
properly stored.
• It is forbidden to store hydraulic oil in
packaging intended for food storage.
• Rubber hydraulic conduits must be
replaced every 4 years regardless of
their technical condition.
PRONAR T672ECO
Chapter 2
F.3.3.259.05.1.EN
2.5