Table of Contents
Advertisement
®
Advanced Energy
Table F‑2. Converter box and analog box UPP commands (Continued)
Parameter
Display
<AA>ro<VAL>
orientation
Automatic
<AA>AD<VAL>
addressing
Automatic
<AA>AA<VAL>
addressing
option
Repeat request
<AA>rp<VAL>
Restart
<AA>re
converter box
Read
<AA>ip
PROFINET
address
57010228-00C
Command
The converter box responds with a 2-digit value
from 00 to 08 identifying the number of sensor
heads connected.
Sets the orientation of the converter box built-in
display.
Valid values are 0 to 3.
Automatically sets the sensor head address for
all connected sensor heads.
Valid values are 0 to 2.
Toggles the automatic addressing function of the
converter box.
Valid values are 0 and 1.
Defines how often a request to a sensor head
is repeated (in case of no response or a wrong
answer) before an error message is shown
(timeout).
Valid values are 00 to 99.
Restarts the converter box (does not affect any
settings).
Reads the address of the PROFINET module
(8-digit hexadecimal ACSII).
UPP Commands
Impac
Description
0 = 0°
1 = 270°
2 = 180°
3 = 90°
0 = Disables automatic addressing (the
converter box responds with no)
1 = Sets the address of all connected sensor
heads in the order shown on the converter
box display or in the Infra600 software (A1
to A8)
2 = Resets all sensor head addresses
0 = Disable automatic addressing
1 = Enable automatic addressing
®
Series 600 Pyrometer
F‑9
Advertisement
Table of Contents
