Parameterization Flowchart - Advanced Energy Impac 600 Series User Manual

Pyrometer

Hide thumbs

Table Of Contents

Table of Contents

Advanced Energy

Table 3‑1. Soft key functions (Continued)

Soft Keys

Down arrow

DIS or ESC

When changing settings with the converter box display, you first must make a

selection from the available devices to be parameterized. Once you select a device to

be parameterized, you can set new values for individual parameters as needed.

☞

Important

Pressing the ESC soft key at any time during parameterization will cancel the

current step and go back to the previous step.

To Parameterize Devices Using the Converter Box Display

1. If necessary, press the DIS soft key to detect any newly connected sensor

heads.

2. Press the PAR soft key to initiate parameterization.

3. Press the up-arrow and down-arrow soft keys to toggle between the available

devices.

☞

Important

4. Press the PAR soft key to select the desired device to be parameterized.

5. Repeatedly press the PAR soft key to toggle between the available parameters

for the selected device until the display shows the desired parameter.

6. Press the up-arrow and down-arrow soft keys to adjust the value of the

parameter as desired.

7. Press the ENT soft key to set the new parameter value.

8. Repeat steps 4 through 6 to set new values for additional parameters for the

selected device as needed.

9. Press the ESC soft key to return to device selection, and then repeat steps 2

through 8 to parameterize additional devices as needed.

10. Press the ESC soft key to return to the main screen.