[1]
2) Install the stack wall (lower) in the position that shutter drive roller [1] can
be seen through the hole of stack wall (lower).
4.2.7 Saddle Inside Cover
4.2.7.1 Remove the Saddle Inside Cover (Upper)
1) Open the front cover.
2) Remove the saddle inside cover (upper) [1].
- 1 knob [2]
- 2 screws [3]
[2]
F-4-32
[1]
[1]
F-4-33
4.2.7.2 Removing the Saddle Inside Cover (Lower)
1) Open the front cover.
2) Remove the saddle inside cover (lower) [1].
- 1 knob [2]
- 4 screws [3]
[3]
[1]
4.2.8 Inside Cover (Upper)
4.2.8.1 Removing the Inside Cover (Upper)
1) Open the front cover.
2) Push the claw [1] as the direction of the arrow, and remove 3 knobs [2].
[2]
0020-8349
CAUTION:
Be sure not to drop the bearing [1] inside the knob.
F-4-34
[2]
F-4-35
[1]
F-4-36
Chapter 4
[2]
[3]
[1]
[3]
0020-8351
[3]
0020-8352
4-9