Table of Contents
Advertisement
Chapter 2
[3]
4) Connect the ARCNET cable [1] to the terminal [2] of the finisher, and turn
the knob [3] in the direction of the arrow to secure.
CAUTION:
Be sure the power-off of the host machine and the unplugged power plug
before connecting the ARCNET cable.
5) Install the wire saddle [1] on the rear cover of the finisher.
2-24
[1]
F-2-82
[3]
[2]
[1]
F-2-83
[2]
[1]
6) Bundle the ARCNET cable [1] with the wire saddle [2].
<If connected to Host Machine>
<If connected to Multi Drawer Document Insertion Unit>
<If connected to Professional Puncher Integration Unit>
F-2-84
[2]
[1]
[2]
F-2-85
[1]
[2]
F-2-86
Advertisement
Table of Contents
