Staple Operation - Canon Saddle Finisher-AF2 Service Manual

3) The machine disengages the alignment roller and the trailing edge retainer holds the trailing edge of paper.
[5]
[1]
[3]
[2]
4) There is one sticker unit at the front and the rear of the machine respectively. When the alignment operation is complete and the trailing edge retainer is released,
the stitcher unit starts the stitching operation on the paper.

3.6.5 Staple Operation

1) There is one sticker unit at the front and the rear of the machine respectively. When the alignment operation is complete and the trailing edge retainer is released,
the stitcher unit starts the stitching operation on the paper.
[1] Pull roller
[2] Alignment roller
[3] Alignment guide
[4] Leading edge stopper
[1] Pull roller
[2] Alignment roller
[3] Alignment guide
[4] Leading edge stopper
[5] Tapping plate
[6] Trailing edge stay
[7] Paper
[6]
[7]
[3]
[4]
F-3-46
[5] Tapping plate
[6] Trailing edge stay
[7] Paper
Chapter 3
[5]
[1]
[3]
[2]
0020-4854
3-37