Canon Saddle Finisher-AF2 Service Manual page 116

Chapter 4
8) Remove the tray A unit [1] by lifting it to the upper direction. (page 5-
7)Reference[Adjusting Position of Tray A, B]
CAUTION:
Do not hit the upper cover [1] during the tray removal.
[1]
2. Remove the Tray B Unit
1) Remove the stopper (middle) [1].
- 1 screw [2]
4-6
[2]
[1]
F-4-21
[1]
F-4-22
[2]
2) Remove the cable [1].
- 1 screw [2]
- 1 tooth washer [3]
- 1 connector [4]
[4]
3) Remove the 2 screws [1], pull out the cable as the direction of the arrow.
[1]
4) Remove the tray B cover [1].
- 4 screws [2]
[1]
F-4-23
[1]
[3]
[2]
F-4-24
[2]
F-4-25