Table of Contents
Advertisement
Chapter 5
[1]
SW382
SW381
SW383
SW384 SW385
(-)
(+)
6) Press switch SW385 [1] to start adjustment of the 2 stapling positions.
SW382
SW381
SW383
SW384 SW385
(-)
(+)
7) Pressing switch SW383 [1] or SW384 [2] determines adjustment level.
By pressing SW383 once, the LED [3] indicates "-1" and the 2 stapling
positions shift to the upper side. In the same way, by pressing SW384
once, the LED [3] indicates "+1" and the 2 stapling positions shift to the
lower side.
- Adjustment range: +20 to -20 (shifting amount per unit: 0.5mm)
5-16
ENTER
F-5-69
ENTER
[1]
F-5-70
SW382
SW381
SW383
SW384 SW385
(-)
(+)
ENTER
[1]
[2]
8) Press switch SW385 [1] to move the stapler to the 2-stapling position.
SW382
SW381
SW383
SW384 SW385
(-)
(+)
9) Place A4 paper [1] on the intermediate process tray (Be sure to push in the
paper to the rear side of the process tray).
10) Check that the stapling position is within the specified range [1] (81.7 +/
[3]
F-5-71
ENTER
[1]
F-5-72
[1]
F-5-73
Advertisement
Table of Contents
