Adjustment In The Case Of Canceling Limit For Tray Stack - Canon Saddle Finisher-AF2 Service Manual

4) Remove the screw [2] to remove the switch cover [1].
[1]
[2]
5) Set DIP SW382 [1] on the switch PCB as shown in the figure below.
[1]
SW382
SW381
SW383 SW384 SW385
(-) (+)
6) Press switch SW385 [1] so that this adjustment is ready now.
[1]
F-5-157
F-5-158
ENTER
F-5-159
SW382
SW381
SW383 SW384 SW385
(-) (+)
7) Pressing push switch SW384 [1] once displays "+1" on the LED [2].
SW382
SW381
SW383 SW384 SW385
(-) (+)
8) Press switch SW385 [1] again to complete this adjustment.
SW382
SW381
SW383 SW384 SW385
(-) (+)
5.3.2.24 Adjustment in the Case of Canceling Limit for
Tray Stack
Execute this adjustment in the case of canceling the limit for tray stacking of
coated paper or extra-length paper or replacing EEPROM (IC107) on the fin-
isher controller PCB.
Chapter 5
ENTER
[1]
F-5-160
[2]
ENTER
[1]
F-5-161
ENTER
[1]
F-5-162
0021-1732
5-35