Pressing Roller Unit; Preparation For Removing The Pressing Roller Unit - Canon Saddle Finisher-AF2 Service Manual

[1]
[2]
[2]
4) Remove the belt [1].
[1]
5) Remove the roller fixing plate (rear) [1].
- 2 screws [2]
6) Remove 2 connectors [1] on the backside.
[1]
F-4-159
F-4-160
[1]
[2]
F-4-161
7) Remove 2 positioning pins [1].
- 2 screws [2]
[1]
[1]
8) Remove the pressing unit [1].
[1]

4.4.13 Pressing Roller Unit

4.4.13.1 Preparation for Removing the Pressing Roller
Unit
2) Pull out the saddle unit. (service position) (page 4-32)Reference[Pull
Out the Saddle Unit (Service Position)]
2) Remove the saddle inside cover (lower). (page 4-10)Reference[Remov-
ing the Inside Cover (Lower)]
3) Remove the pressing unit. (page 4-36)Reference[Removing the Press-
ing Unit]
Chapter 4
[1]
F-4-162
[2]
[2]
F-4-163
F-4-164
0020-8782
4-37