EBARA GP Operating And Maintenance Manual page 39

VERSION WITH ON-BOARD PUMP INVERTER (E-SPD+ MT2200 – TT4000)
POWER SUPPLY
QP = Protection panel
P = Electric pump 1(2,3)
1(2,3)
TR = Transducer
INV = Inverter 1(2,3)
1(2,3)
*Lm = Magnetic core, only for MV models
1(2,3)
*Lt = Magnetic core, only for TT models
1(2,3)
Notes:
- for connecting the protection panel to the power supply line, see the attached panel manual
- The connections with dash lines are the responsibility of the installer
Note: "Lm" magnetic core application (E-SPD+ MV model MT2200)
For single-phase models (E-SPD+ MV 2200), the magnetic core is positioned close to the inverter, encasing the power cable,
as shown in the inverter's specific instruction manual.
Note: "Lt" magnetic core application (E-SPD+ model TT4000)
For three-phase models (E-SPD+ TT 4000), the magnetic core is positioned encasing the 4 motor power connecting cables,
therefore close to the "MOTOR OUTPUT" terminal block of the inverter internal board.
ENGLISH
15