Care And Maintenance - Terex TL120 Operating Instructions Manual

7

Care and Maintenance

The good operating condition and life expectancy of
machines are largely influenced by care and
maintenance.
For this reason, it is in every machine owner's interest
to perform the specified maintenance work and
comply with the service intervals. This Chapter deals
in detail with periodic maintenance, inspection and
lubricating tasks.
The type-specific maintenance and inspection plan
lists all work to be performed on the machine at
regular intervals. Maintenance and inspection plans
for this purpose are contained in every instruction
book.
It is essential that the recommendations in the
Chapter "Safety and Prevention of Accidents"
( 2, 13) are observed.
7.1 Intervals
First inspection
Daily jobs
Weekly jobs
100 operating hours
Every 500 operating hours
Every 1000 operating hours
Every 2000 operating hours
Table 22 Intervals
1
The first date to arrive always applies.
2
Also applicable if new or overhauled diesel engines are put into operation.
Operating Instructions Wheel Loader TL120
Care and Maintenance
First inspection once before first putting into operation
Every 10 operating hours or every shift
Weekly or after 50 operating hours
Once after first putting into operation
After every 500 operating hours or 6 months
After every 1000 operating hours or 12 months
After every 2000 operating hours or after 2 years
7.7.1, 64
1 7.7.2, 66
1 7.7.2, 66
2
7.7.4, 70
7.7.4, 70
7.7.4, 70
7.7.4, 70
7
59