Terex TL120 Operating Instructions Manual page 86

7 Care and Maintenance
• Remove the bleeder hose and re-tighten the
bleeder screw.
Attention
TL120S - The tasks listed in Chapter
7.8.8.3, must be performed, as well.
• Dismount the bleeding device and close the brake
oil container using the original cover.
• Re-mount the cover on the front-end.
7.8.8.3 TL120 S - Changing the rear axle brake
oil and bleeding the brake
Attention
• Collect the waste oil in a suitable container
and dispose of according to regulations.
Attention
Use a bleeding device for changing brake oil
and bleeding.
• Release the bleeder screw (55/1), connect the
bleeder hose and insert it into collecting bottle.
• Connect the bleeding device to the brake oil
container (53/1).
• Change brake oil and bleed the brake according to
the Bleeding Device Operating Instructions.
• Remove the bleeder hose and re-tighten the
bleeder screw.
• Dismount the bleeding device and close the brake
oil container using the original cover.
• Re-mount the cover on the front-end.
86
1
Fig. 55 Bleeding the rear axle brake of TL120S
Operating Instructions Wheel Loader TL120
1
L854s-051