Terex TL120 Operating Instructions Manual page 46

4 Operation
Driving off
• Set the travel direction preselection rocker switch
on the joystick (15/7) and on the instrument panel
(15/36) to "0" (neutral position).
• The indicator lamps (15/24 and 15/28) must not
light up.
• Start engine.
• Raise lift frame as far as the "Travel" height
mark (16/1).
• Select speed range "FAST" or "SLOW" (15/33) as
required.
• High-speed version (option) -
select speed range I or II.
• Observe the indicator lamp (15/58-60).
• Release the parking brake (15/9).
• Adjust the desired travel direction using the
preselection switches for travel direction
(15/7 / 15/36 respectively).
• The indicator lamp (15/24 or 15/28) lights up.
• Press accelerator pedal (15/3). The machine only
drives off once a certain engine speed is reached.
• Travel speed is increased and decreased using
the accelerator pedal. Travel speed directly
depends on engine speed.
• The direction of travel may be changed quickly by
operating the preselectors (15/7 / 15/36
respectively).
Coming to a halt
• Travel speed is reduced by releasing the
accelerator pedal. The hydrostatic travel drive acts
as a non-wearing auxiliary brake.
• Operate the brake-inching pedal (15/2) as
required.
• Also refer to 4.8.3, 47.
46
24
2
36
33
Fig. 15 Driving off and coming to a halt
1
Fig. 16 Height mark
Operating Instructions Wheel Loader TL120
Option
"S"-version
58
I
59
28
II
60
N
3
7
9
L824-017
L824-018