Terex TL120 Operating Instructions Manual page 85

7.8.8 Brakes
7.8.8.1 Checking the brake oil level
• Visual inspection (53/1) of brake oil level.
Danger to life
due to incorrect brake oil.
• Only top up with ATF-oil!
7.8.8.2 Changing brake oil and bleeding the
brake
Attention
• Collect the waste oil in a suitable container
and dispose of according to regulations.
Attention
• Use a bleeding device for changing brake
oil and bleeding.
• Remove the cover on the front-end above the axle.
• Release the bleeder screw (54/1), connect the
bleeder hose and insert it into collecting bottle.
• Connect the bleeding device to the brake oil
container (53/1).
• Change brake oil and bleed the brake according to
the Bleeding Device Operating Instructions.
• Remove the bleeder hose and re-tighten the
bleeder screw.
• Release the bleeder screw (54/2) on the inch valve
of the "travel" hydraulic pump; connect the bleeder
hose and insert it in the collecting bottle.
• Perform the bleeding process.
Operating Instructions Wheel Loader TL120
Care and Maintenance
Fig. 53 Checking the brake oil level
Fig. 54 Bleeding the brake
7
L854-6454_R004
1
1
2
L854-051
85