7
Care and Maintenance
7.8.15.2 Removing the battery
•
First disconnect the battery ground cable (-) and
then the positive cable (+).
•
Slacken clamping bracket (64/1).
•
Lift out the battery.
7.8.15.3 Installing the battery
•
Place the battery in the machine.
•
Secure with the clamping bracket.
•
Connect first the positive battery cable, then the
ground cable.
Machine damage
due to interchange of terminals.
• Ensure that the negative terminal is
connected to the negative pole (–) and the
positive terminal to the positive pole (+).
Attention
Note that the battery charge should be
closely monitored particularly in winter.
7.8.15.4 Checking lighting and warning
equipment
•
Check the function of the lighting equipment.
•
Check the function of the indicator lamps.
•
Check the function of the warning equipment.
7.8.16 Cab ventilation dust filter
The air intake for the heater and fresh air supply of the
cab features a dust filter, optionally a charcoal/ pollen
filter.
94
Fig. 64 Removing and installing the battery
Operating Instructions Wheel Loader TL120
1
L854-060