4
Operation
4.8.4
Driving on roads
•
Before driving on open roads, the following points
have to be observed:
Endangerment of road-traffic
due to missing equipment.
Ensure that the wheel loader is equipped as
stipulated by the regulations authorizing the
use of vehicles for road traffic in the user's
country.
•
Empty the bucket and tilt back completely.
•
Attach the protective device on the front bucket
edge.
•
Secure the side-dump bucket with socket pins.
•
Completely retract the high-tip bucket.
•
Fold up the forks of the fork lift attachment, lock in
place and secure against lateral shifting.
Danger to life
due to rigid forks.
• Rigid forks must be dismounted before
driving on public roads!
•
Raise the lift frame as far as the height color mark
(18/1) until sufficient ground clearance is secured.
•
Set the travel direction preselection rocker switch
on the joystick (19/7) and on the instrument panel
(19/36) to "0" (neutral position).
•
Switch off the working hydraulics (19/35).
Attention
Only press when machine is stationary!
•
Check the function of the direction indicators,
hazard warning lights, horn, low/high beam.
•
Close the cab door.
48
1
Fig. 18 Height color mark
35 36
Fig. 19 Driving on roads
Operating Instructions Wheel Loader TL120
L824-018
7
L824-020