Fuels, Lubricants And Coolants - Terex TL120 Operating Instructions Manual

3 Technical Specifications
3.8 Tires
Tire size
405/70
425/75
14.5-20
16/70-20
365/80
375/75
Table 9 Technical specifications - tires
Special tires available on request!
If solid-rubber or foamed tires are used,
special measures must be taken and
restrictions apply.
Attention
The tire pressure refers to standard
equipment. During fork lift operations, the tire
pressure of the front wheels must be
increased by at least 0.5 bar.
3.9

Fuels, lubricants and coolants

3.9.1 Fluid capacities
All values stated are approximate. The level marking is always the decisive factor.
Fluid capacities
Fuel tank
Engine with oil filter
Hydraulic oil, tank and system
Hydraulic oil tank
Service brake
Front axle center housing
Rear axle center housing and
transmission (standard)
Rear axle center housing and
transmission (high-speed version)
Wheel hubs, front / rear axle
Coolant
Table 10 Fluid capacities
* The hydraulic oil quantity depends on the equipment level of the machine.
28
Type Profile
R 20 EM 01
R 20 XM 27 TL
MPT 10 PR
EM 10 PR E 91-2
R 20 EM
R 20 XM 27 TL Michelin
in liters (l)
0.85 each
Tire pressure in bar
front
3.2
2.0
E 91 3.2
3.2
4.0
3.2
Fuels and lubricants
110.0 Diesel fuel
8.5 Engine oil (change quantity)
93.0* Hydraulic oil
62.0 Hydraulic oil (oil change quantity)
0.25 ATF-oil
7.8 Transmission oil
8.4 Transmission oil
9.3 Transmission oil
Transmission oil
17.5 Mixture of water, additives and glycol
Operating Instructions Wheel Loader TL120
Tire pressure in bar
rear
3.0
1.5
2.0
2.4
3.2
2.4