Driving, Steering And Braking - Terex TL120 Operating Instructions Manual

4.8

Driving, steering and braking

4.8.1 Driving
Attention
When driving on public roads, the wheel
loader, as a self-propelled work machine, is
subject to the legal regulations valid in the
user's country. (For example, in the Federal
Republic of Germany, StVZO and StVO).
The machine has two preselection switches for travel
direction which are alternately active.
Change-over by means of the multi-function
switch (14/35).
One preselection switch for travel direction (14/36) is
located on the instrument panel and another such
switch on the joystick (14/7) operating the working
hydraulics.
Danger to life
due to false actuation of controls.
• The multi-function switch (14/35) is only to
be pressed if the machine is at a standstill
and both travel direction preselection
switches are in neutral position. If the two
direction-of-travel preselection switches
are pressed in a contradictory manner, the
machine stops.
• When driving on roads, the joystick (14/7)
for the work equipment must be
deactivated by operating the multi-
function switch (14/35). By doing so, the
travel direction preselection switch on the
joystick (14/7) is without function, too.
The direction of travel is preselected using the switch
(14/36) on the instrument panel.
In working mode, the joystick (14/7) for the work
equipment must be deactivated by operating the
multi-function switch (14/35). By doing so, the switch
(14/36) on the instrument panel is without function.
The direction of travel is preselected using the travel
direction preselection switch on the joystick (14/7).
Operating Instructions Wheel Loader TL120
35 36
Fig. 14 Driving and steering
Operation 4
7
L824-016
45