4.5
Heating/ventilation
Heating
•
The heater is connected to the engine oil circuit.
•
The fan is operated using the switch (13/44);
temperature is adjusted using the control (13/57)
and can be operated with fresh air and
re-circulating air.
•
Open aspirating hole (13/12) for re-circulating air
mode.
•
The air is distributed by adjusting the air vents.
Ventilation
•
In ventilation mode, the valve towards the engine
coolant circuit remains closed.
•
The fan is operated using the switch (13/44).
•
The air is distributed by adjusting the air vents.
Air-conditioning (option)
•
Operate the air-conditioning system using the
switch (13/43).
4.6
Lighting in compliance with
German Road Traffic Regulations
(StVZO)
•
The lighting of the loader is switched on and off by
turning the steering-column switch (13/1).
Setting 0
Light OFF
Setting 1
Parking light
Setting 2
Driving light (low beam / high beam).
Switch from one to another by lifting
the steering-column switch (13/1).
Blue indicator lamp for high-beam
(13/30) lights up.
Operating Instructions Wheel Loader TL120
1
Fig. 13 Heating, ventilation, air-conditioning, and lighting
Operation
4
30
12
57
43
44
L824-015
43