Maintenance And Care 7; General Notes; Intervals - Terex TL80 Operating Instructions Manual

7 Maintenance and Care

7.1 General notes

The good operating condition and life expectancy
of machines are largely influenced by care and
maintenance.
For this reason, it is in every machine owner's
interest to perform the specified maintenance work
and comply with the service intervals. This chapter
deals in detail with
inspection and lubricating tasks.
The type-specific maintenance and inspection plan
lists all work to be performed on the machine at

7.2 Intervals

Initial inspection
Daily tasks
Weekly tasks
100 operating hours
Every 500 operating hours
Every 1,000 operating hours
Every 2,000 operating hours
1)
The first date to arrive always applies
2)
also applicable if new or overhauled diesel engines are put into operation.
TL80
periodic maintenance,
Once before first putting into operation
Every 10 operating hours or every shift
Weekly or after 50 operating hours
Once after first putting into operation
After every 500 operating hours or 6 months
After every 1,000 operating hours or 12 months Chapter 7.8.4
After every 2,000 operating hours or after 2
years

Maintenance and Care 7

regular intervals. Maintenance and inspection
plans for this purpose are contained in every
Instruction Book.
It is essential that the recommendations in
chapter 2 "Safety and Accident Prevention",
are observed.
1)
1)
2)
Chapter 7.8.1
Chapter 7.8.2
Chapter 7.8.2
Chapter 7.8.4
Chapter 7.8.4
Chapter 7.8.4
63