Terex TL120 Operating Instructions Manual page 32

3 Technical Specifications
Fork lift attachment
Width of fork carrier
Length of forks
Fork cross section
Max. stacking height
Table 18 Dimensions of fork-arm connection in compliance with ISO/FEM Class 2 Form B, DIN 15 173 / ISO 2328 respectively
The payloads are determined in compliance with
DIN 24094 / ISO 8313 respectively with a stability
factor of 1.25 or 80% of the tipping load and the
machine moving over level ground.
The payloads are valid for the machine fitted with
405/70 R 20 tires and the equipment condition as
described in compliance with ISO 6016.
Total lift range
500 mm
19,7 inch
+0,5 bar
+7,3 psi
Table 19 Total lift range of fork attachment
Transport position
500 mm
19,7 inch
+0,5 bar
+7,3 psi
Table 20 Transport position of fork lift attachment
If screw-on rear axle weights or rear tires with
hydroinflation are used.
kg
lbs
Attention
During fork lift operations, the tire pressure of
the front wheels must be increased by at
least 0.5 bar.
32
kg
+
lbs
kg
+
lbs
S=2.0
kg 1680
lbs 3710
kg 1870
kg
lbs
lbs 4120
kg
lbs
S=1.67
kg 2470
lbs 5440
kg 2610
kg
lbs
lbs 5760
kg
lbs
Operating Instructions Wheel Loader TL120
mm
1240
1120
140 x 50
3365
S=1.25
2700
5950
3000
6600
S=1.25
3300
7270
3500
7700