Terex TL120 Operating Instructions Manual page 52

5 Working Operation
Continuous operation - Additional control circuit
• Additional control circuit (22/47) in Position 2 -
red indicator lamp lights up.
Danger to life
due to incorrect operation.
• Observe the function of the attachment
(e.g. rotating direction of attachment).
Attention
The additional control circuit must always be
switched off unless additional equipment is
operated.
Operation - Float position of lift frame
Attention
The float position must always be switched
off unless operated. Switch (22/48) in
Position "0".
Impulse Mode
• Float position switch (22/48) in Position "1".
• Lower the bucket onto the ground.
• Press switch (22/8). Float position is activated.
Continuous operation
• Lower the bucket onto the ground.
• Switch (22/48) in Position "2" - green indicator
lamp lights up.
Option - 4th control circuit, adjustable
Attention
The hydraulic power of a number of
attachments must be adjusted, e.g. rotational
speed of sweepers, etc.
• Move the attachment to operating position.
• Press switch (22/56).
• Operate the turning knob (22/62) to adjust
hydraulic power (e.g. rotational speed).
52
Fig. 22 Operating the loader
Operating Instructions Wheel Loader TL120
8
47
62
48
56
L844-023