Customer Monitoring Mode - Operating Mode 3 - Rancilio EGRO 55 Series Technical Manual

3.2 CUSTOMER MONITORING MODE -- OPERATING MODE 3
The Product total menu allows customers to easily monitor the total number of products that have been produced using the
Egro 55 series machine.
1. Change the operating mode of the machine to, MODE 3
1.1 Insert key turn to the right.
1.2 Press number 3 button on the key pad.
Product Total
Shows the product total for each product button that is programmed.
P_ #
To change the product total that is displayed use the + (number 7) button.
Clears the product total fi gure. To activate press the enter or number 1 button. The display will prompt
PT Clear
you to confi rm your decision to clear the product total, by displaying PT Clear?. To confi rm the clear
press the number 1 button again.
© Copyright 2008. Rancilio North America
PROGRAMING MENU DIAGRAM
Products...
Example: P1 87, in this example the machine has produced 87 for product button
number 1, which is most often the single espresso button.
(Customer Monitoring mode or Product Total menu)
Config1...
- Section 3: Page 7 -
EGRO 55 SERIES TECHNICAL MANUAL
Config2... Service...
E55_TM_programmingV3