Rancilio EGRO 55 Series Technical Manual page 52

3.9 PARAMETER QUICK INDEX
SENSORS, ALERTS, AND COUNTERS
PARAMETER
C-Cleaning Displays number of times the coffee cleaning program has been run since last
CLR-R-Serv
CLR_Error Clears error history
CLR_P_Serv Clears PM service counter
CLR_W_Serv Clears water service counter
C_Request Cleaning alert: Set # of cycles machine performs before giving a cleaning alert
Cycles Total number of produced on machine since manufacturing date
Grounds Value Specifi es number of cycles before displaying grounds drawer full alert
IMS Beeper Turns beeper on or off
Last Errors List last 64 errors that the machine has encountered
MB_Sensor Enables or disables milk and coffee sensors
M_Cleanings Displays number of milk cleanings since last CLR P Serv
Max_cycles Specifi es number of cycles before PM service alert is shown
Product_total Shows the total number of products produced since last PT_Clear
PT_Clear Enables or disables product counter menu clear function
Water Control Enables or disables the minimum brew-time functions. If the brewing time is too
slow, a "CHECK WATER" message will appear on the display screen.
W_Serv Specifi es the number of cycles before the water service message is shown
STEAM WAND SETTINGS
TS WAND (Auto-shut off) SETTINGS
PARAMETER
Auto Steam Defi nes which type of TS wand is installed on the machine
Ref. Temp AS Specifi es temperature in Celsius at which TS wand will automatically shut off
ISTEAM SETTINGS
PARAMETER
iCorrect Fct Can be used to compensate for difference between programmed and actual fi nal
shut off temperatures
iButton Foam This submenu contains the programming for the temperature and emulsion levels
of the cappuccino button or left side button on the iSteam wand.
iButton Milk This submenu contains the programming for the temperature and emulsion levels
of the latte button or right side button on the iSteam wand.
© Copyright 2008. Rancilio North America
DESCRIPTION
DESCRIPTION
DESCRIPTION
- Section 3: Page 27 -
EGRO 55 SERIES TECHNICAL MANUAL
MENU PAGE
Service... 18
Service... 19
Service... 18
Service... 18
Confi g 2... 16
Service... 18
Confi g 1... 12
Confi g 2... 15
Service... 18
Confi g 2... 15
Service... 19
Service... 18
Mode 3... 7
Confi g 2... 16
Confi g 2... 13
Service... 18
MENU PAGE
Confi g 2... 16
Confi g 2... 16
MENU PAGE
Confi g 2... 17
Confi g 2... 16
Confi g 2... 17
E55_TM_programmingV3