Rancilio EGRO 55 Series Technical Manual page 42

3.5 CONFIG 2 MENU
Confi g 2 Menu contains parameters for making adjustments to the machine that do not effect the specifi c drink parameters.
Product Total
iButton Milk
iButton Milk: This submenu contains the programming for the temperature and emulsion levels of the latte button or
right side button on the iSteam wand.
Use this parameter to set the fi nal temperature of the steamed and frothed milk for the latte button on the iSteam
Temperature
wand. This temperature is in Celsius.
Use this parameter to set the emulsion level or foaming level associated with the latte button on the iSteam
wand. OPTIONS: 0 - 6.
E-degree
and shut air off prior to reaching the fi nal temperature. For example, if you set this parameter to 2 the iSteam will begin steaming
with air infused and stop infusing air after a few seconds of steaming. Full power steaming will continue and the result will be a
steamed frothy milk with a touch of foam.
ONLY VALID WITH SOFTWARE 2.10 OR HIGHER
This setting can be used to compensation for any calibration issues with the iSteam or TS wand temperature
iSteamCorrFct
probes. Use this setting to correct any differences between the actual fi nal temperature of the milk and
programmed fi nal temperature. OPTIONS: 0 - 20.
Specifi es how temperature will be displayed.
Fahrenheit
Enables or disables pressure switch during hot water delivery.
Tea/Steam
© Copyright 2008. Rancilio North America
Products...
ISTEAM SETTINGS: ONLY VALID WHEN ISTEAM WAND IS PRESENT
PLEASE NOTE: For all settings 1, 2, 3, 4, and 5, the iSteam will add air to the steaming process
0 = no foam or no air during steaming
6 = maximum foaming --- air infused steam from the beginning to the end of steaming
0 = Celsius
1 = Fahrenheit
0 = Pressure switch disabled
1 = Pressure switch enabled (default setting)
Config1...
- Section 3: Page 17 -
EGRO 55 SERIES TECHNICAL MANUAL
Config2...
Service...
E55_TM_programmingV3