Rancilio EGRO 55 Series Technical Manual page 107

6.7 BREW GROUP REBUILD GUIDE
6. DISASSEMBLE AND CLEAN THE LPA --- Continued
6.8
6.8 Remove wiring harnesses from mounting plate below motor and piston sensing arm by unscrewing
screws using a Phillip's head screwdriver
TOOL: Phillip's head screwdriver
6.9
6.9 Remove wires from guides in mounting plate
TIP: Carefully cut zip tie if necessary
6.10 Remove motor sensing lever by unscrewing screws using a Phillip's head screwdriver
TOOL: Phillip's head screwdriver
6.11 Remove piston spring plate by unscrewing two 4mm Allen Screws
TOOL: 4mm Allen Wrench
6.10
- Section 6: Page 34 -
EGRO 55 SERIES TECHNICAL MANUAL
6.11