Config 1 Menu - Rancilio EGRO 55 Series Technical Manual

3.4 CONFIG 1 MENU

Confi g 1 Menu contains parameters for making adjustments to the machine that do not effect the specifi c drink parameters.
Product Total
Grinders...
GL Sec/10Gr
GR Sec/10Gr
Grinder L test?
Grinder R test?
Adjusts the temperature of the coffee boiler, in Celsius.
Ref-Temp. CB
Recommended Setting: 92 C
In activate parameter not recommended for use.
Capp Corr
When the machine is turned on, the coffee delivery system is rinsed with hot water so that the brewing system can reach
its optimal operating temperature faster.
Prerinse
PressReg.
In activate parameter not recommended for use.
Specifi es when to display the "DRAWER FULL" message on the screen, based on the amount of ground coffee in
kilograms. Note: the 0.0 setting should be used
Grounds Value
not displayed. Factory set to 0.4kg.
(Options: 0.0kg - 9.9kg)
Recommended Setting: 0.4kg
© Copyright 2008. Rancilio North America
Products...
Left Grinder, grinding time in seconds to produce 10 grams of coffee.
TIP: First: set your grinder to produce the coarseness of grind you prefer.
Second: perform the Grinder tests as described below.
Left Grinder, grinding time in seconds to produce 10 grams of coffee.
TIP: First: set your grinder to produce the coarseness of grind you prefer.
Second: perform the Grinder tests as described below.
TIP: First: set your grinder to produce the coarseness of grind you prefer.
Activates Left grinder to perform test to calibrate machine. Adjust grinder until grounds weigh 10 grams.
Machine records the time it takes to grind 10 grams and uses this as bases for all product settings.
TIP: If you adjust the coarseness of the grind, run grinder test twice before weigh grounds again. This
will clear the chute of previously ground coffee.
TIP: First: set your grinder to produce the type of grind you prefer.
Activates Right grinder to perform test to calibrate machine. Adjust grinder until grounds weigh 10 grams.
Machine records the time it takes to grind 10 grams and uses this as bases for all product settings.
TIP: If you adjust the coarseness of the grind, run grinder test twice before weigh grounds again. This
will clear the chute of previously ground coffee.
0 = OFF (Disabled)
1 = ON (Enabled)
Config1...
with the grounds chute, so the "DRAWER FULL" message is
- Section 3: Page 12 -
EGRO 55 SERIES TECHNICAL MANUAL
Config2...
Service...
E55_TM_programmingV3