Rancilio EGRO 55 Series Technical Manual page 92

6.6 PM GUIDE
A-10.
REATTACH GROUNDS SLIDES TO SIDES OF BGA
A9.1 Reattach the grounds slides to the sides of the BGA
TIP: The shorter bent puck slide goes on the right side of the BGA, when the BGA is facing towards
you (Funnel towards you)
A10.1
A-11.
REASSEMBLE BGA INTO MACHINE
A11.1 Reattach the BGA into the machine
A11.2 Reconnect all cables to main board
ALTERNATIVE STEPS FOR PM TYPE 1:
ON-SITE O-RING EXCHANGE
- Section 6: Page 19 -
EGRO 55 SERIES TECHNICAL MANUAL