Table of Contents
Advertisement
3.3 PRODUCT MENU: HOW TO SET DRINK PARAMETERS IN PROGRAMMING MODE
The Products menu allows for the custom programming of each drink product individually. Every setting
that can have an infl uence on the taste, quality and consistency of the drink may be fi ne-tuned using the
Products menu.
Each product button on the key pad represents a type of product in the programming. For example, on
a Model 5511 button number 1 typically contains all the settings for the single espresso.
PROGRAMMING PRODUCT SETTINGS IN THE PRODUCTS MENU:
1. Change the operating mode of the machine to, MODE 4.
1.1
Insert key turn to the right.
1.2
Press number 4 button on the key pad.
1.3
Enter Pin code... 1849 by pressing the 1, 8, 4, and 9 buttons.
2. Enter the PRODUCTS... menu
2.1
Using the #5 button scroll to the PRODUCT menu.
2.2
Enter into the menu by pressing the #1 button.
3. Choose the appropriate product number
3.1
Using + (7) or the - (9) buttons to choose the appropriate product
number of the product that you would like to program the settings.
For example, Single Espresso is typically product #1 or button #1.
Please note: The product number will be displayed next to the "P" on
the machines display.
Product Total
P_Price
NOT USED IN USA. Amount recorded for one drink cycle.
Defi nes product type, Coffee or Tea
P_Type
Number of fl ow meter pulses. Defi nes the amount of water. (Options: 1 - 1000+)
P_FM Pulses
Amount of ground coffee used, in grams.
P_Gram
(Options 0.1g - 16g)
© Copyright 2008. Rancilio North America
PROGRAMING MENU DIAGRAM
Products...
0 = Coffee
1 = Tea (Hot Water)
TIP: 80 pulses = approximately 1 oz of water
For example, a single shot may require 10 grams, so the setting would be 10.
Config1...
- Section 3: Page 8 -
EGRO 55 SERIES TECHNICAL MANUAL
M_4: PIN...
Products...
P.1 Price 1.00
Config2...
Displays the
product number
Service...
E55_TM_programmingV3
Advertisement
Chapters
Table of Contents
