Changing Operating Mode: How To Enter Programming Mode - Rancilio EGRO 55 Series Technical Manual

3.1b. CHANGING OPERATING MODE: HOW TO ENTER PROGRAMMING MODE
1 OPERATING MODES
'Mode' refers to a specifi c style of operation of the machine. The machine operates in a different manner in each mode or,
alternatively, other operations are carried out.
The machine is equipped to operate in six different modes; modes 4 and 5 can only be accessed by the service technician
and are protected by a PIN code: The current mode is indicated when the key is inserted in the mode selector and turned
1/4 turn clockwise.
CHANGE THE OPERATING MODE
To change the Operating Mode of the machine you need the programming key. Two copies of
the programming key are provided with each machine.
1. Insert the programming key into the lock on the front of the machine.
2. Turn the key clockwise (to the right) 1/4 turn
3. Press the appropriate button of the mode
you would like (0,1,2,3,4 or 5).
ENTER PROGRAMMING MODE:
1. Turn Key.
2. Press button #4.
3. Enter PIN CODE... 1849 by
pressing the 1, 8, 4, and 9 button
on the keypad.
EXPLANATIONS OF MODES
Mode 0: Standby mode:
all buttons of the machine.
Mode 1: Normal mode:
Mode 2: Register mode: this mode is used when the machine is connected to a cash register system.
Mode 3: Customer manager mode:
product, such as, grams and water volume.
Mode 4: Technical menu mode...:
this mode unless you have been properly certifi ed, by Rancilio through either a Train the Trainer Course or a Service
Technician Course.
Mode: 5: Heaters OFF:
safety service the equipment.
© Copyright 2008. Rancilio North America
this mode deactivates
this is the normal operating mode.
this mode is used to check product totals and to change simple parameters for each
this mode is for advanced programming and diagnostic testing. Please do not access
this mode is used by technicians to turn off the heating elements of the boilers, so they may
- Section 3: Page 4 -
EGRO 55 SERIES TECHNICAL MANUAL
M
ODES
M_0: Standby
M_1: Normal
M_2: Regist.
M_3: Product
M_4: PIN...
M_5: Heaters
E55_TM_programmingV3