Mechanical Protective Devices; Electric Safety Devices; Operating Noise; Vibrations - Rancilio CLASSE 6 E Original Instructions Manual

2.3. Mechanical protective devices

The machine is equipped with the following protective
devices:
● complete panelling protection of all the parts
subject to heat and of the steam and hot water
supplier;
● cup-warmer plate supplied with a tray to collect
spilt liquids;
● work surface provided with grill and tray to collect
spilt liquids;
● expansion valve in the water system and valve on
the boiler to avoid overpressure;
● nonreturn valve on the water system to avoid
backflow to the main water supply.

3. TECHNICAL DATA

3.1. Dimensions and weights (Fig.4)
A mm
A1* mm
B mm
C mm
D mm
H mm
H1** mm
Boiler capacity in litres
Machine weight kg
Water inlet
Ømm drainage
Packaging
Volume m
3
Dimensions L x P x H mm
Gross weight kg
* A1(reduced overall dimensions with side case assembly)
**H1 (version lever)
You'll find all the technical data on electric
connection, on the machine identification
label Fig. 1.
Machines provided with gas heating have a standard
connection kit to carry out the following connections
with:
- direct stiff pipe;
- copper and double cone pipe;
- rubber support.
Gas connections must be made in accor-
dance with all local, state and federal safety
regulations.
2 GR.
1 GROUP
COMPACT
60 60
50 50
505 505
500 500
300 300
40 40
850 -
5 5
53 55
3/8" 3/8"
14 14
0.28 0.28
60x650x605 60x650x605
63 65

2.4. Electric safety devices

The safety devices provided are:
● 12V low tension push buttons an the E control key
panel;
● thermal protection on the pump motor;
● gas failure thermocouple and thermocouple ther-
mostat automatically closing gas tap;
● safe resistance thermal;
● Electronic safety devices.

2.5. Operating noise

Noise level in the working place does not usually
exceed 0dB(A).

2.6. Vibrations

The machine is supplied with rubber vibration dam-
ping feet. In normal working conditions, the machine
does not produce vibrations harmful to the operator
and the environment.
2 GROUPS 3 GROUPS
850
30
665
500
300
40
850
11
6
3/8"
14
0.35
880x650x605 1120x650x605 1360x650x605
6

4. USE

The machine have been designed, manufactured and
protected to be used to make express coffee and hot
beverages (tea, cappuccino, etc.). Any other use is to
be considered unsuitable and therefore dangerous.
The manufacturer cannot be held respon-
sible for any damage caused to people
or things due to unsuitable, improper or
irrational use of the machine.
4 GROUPS
100 1330
0 1210
05 1145
500 500
300 300
40 40
850 850
16 22
4 112
3/8" 3/8"
14 14
0,45 0,54
0 108
5