Rancilio EGRO 55 Series Technical Manual page 35

3.3 PRODUCT MENU: HOW TO SET DRINK PARAMETERS IN PROGRAMMING MODE
Product Total
NOT RECOMMENDED, MAY CAUSE ERRORS.
P_Time
Brewing time control or auto-adjust tamping control, modifi es the tamping pressure if the brewing time does not correspond to
this set value. (Only valid if Pressreg., in Confi g1 menu is turned ON (=1).)
Specifi es which bean hopper supplies the coffee for the drink.
P_Cof. Source
Specifi es how many drinks to record when the button is pressed.
P_Count
(Options: 0 - 19)
NOT TYPICALLY USED IN USA.
example, to produce a pitcher of coffee may require more than one cycle.
P_Cycles
(Options: 1 -19)
Recommended settings is 1.
Enables or disables button.
P_Valid Mode1
Enables or disables second level of all buttons. Enables products 10-14.
P_Valid Mode2
TIP:
"SHIFT" IS TURNED ON IN CONFIG2 MENU.
Sets which product name will be displayed on the screen when the drink is being made.
P_Name
(See Product Name Listing on page 10 of this section.)
NOT USED IN USA. Sends drink price to specifi ed register.
P_Reg. Nr.
(Options 1 -39) Only valid if machine is operating in Mode 2.
Percentage of fresh hot water that is delivered after the coffee has been brewed.
P_Bypass
(Options 0 - 99)
© Copyright 2008. Rancilio North America
PROGRAMING MENU DIAGRAM
Products...
0 = manual (center grounds chute)
1 = Left hopper
2 = right hopper
0 = button enabled
1 = button disabled
0 = button enabled
1 = button disabled
use this button to unlock the second level of all buttons, when a DECAF option is needed. ONLY VALID WHEN
Example: For an 8oz Americano, or approx. 640 FM pulses, the Bypass setting could be set to
75. Which means that the machine would use 160 pulses to brew the coffee and add 480 pulses
of fresh water after the brewing was fi nished.
Config1...
Specifi es the number of consecutive brewing cycles made when button is pressed. For
- Section 3: Page 10 -
EGRO 55 SERIES TECHNICAL MANUAL
Config2...
Service...
E55_TM_programmingV3