JRC JMR-92 Series Field Service Manual page 221

Chapter 4. Replacement Procedure
Never attempt to check or repair the inside of the equipment.
Checking or repair by an unqualified person may cause a fire or an electric
shock.
Contact our head office, or a nearby branch or local office to request
servicing.
Never remove the cover of this equipment.
Touching the high-voltage section inside will cause an electric shock.
Do not attempt to disassemble or tamper with this equipment.
Otherwise, a fire, an electric shock, or a malfunction may occur.
When conducting maintenance, make sure to turn the main power Off.
Failure may result in electric shock.
Turn Off all the main powers before cleaning the equipment. Make sure to
turn it off since voltage is still outputted from the rectifier even after the
indicator and the radar are turned Off. Failure may result in equipment
failure, or death or serious injury due to electric shock.
When conducting maintenance work on the Scanner unit, make sure to turn
all the main powers Off.
Failure may result in electric shock or injuries.
Make sure to turn Off the Scanner unit safety switch. Failure may result in
injuries caused by physical contact with the rotating radiator.
DANGER
4-1 Chapter 4 Replacement procedure