10 Flexset Turn Off After Initialization - Tadiran Telecom FlexSet 280 Manual

10 FlexSet turn Off After Initialization

The following may happen during installation:
When a FlexSet that has been properly initialized is not functioning, i.e., the display is
blank and the keys are not operational, it is recommended to switch this telephone
with another one. If the other one does not initialize, it is recommended to connect the
(original) telephone directly to the MDF. If this does not help, try to initialize the
(8/16/24)SFT, (8/16/24)SFT Office, (4/8)SA8F Office, (4/8)SA16F Office,
(4/8)S8F Office, (4/8)S16F Office, (8/16)SFTipx, (8/16)SFTsl or 8F8Ssl card to which the
telephone is connected by removing it from its slot and then re-inserting it. If this does
not work, try replacing the card.
2-14
Coral Terminal Equipment