Table of Contents
Advertisement
FlexSet Installation
1
FlexSet 121S and 281S models require
Coral software version 15.5 or higher.
1
Preparing for Installation
Inspect for damage
1.
Inspect the shipping carton for evidence of physical damage or mishandling prior
to opening.
2.
Inspect all parts for damage.
3.
Report any damage to the carrier immediately.
4.
If it is necessary to make a damage claim to the carrier, do not move the shipping
carton until it has been examined by a representative of the carrier.
Once the telephone is fully assembled, it is no longer necessary to keep the empty
cartons. Dispose of it in accord with local regulations.
Unpacking the Shipping Container
The following items should be present in the box containing the FlexSet telephone set:
1.
Twisted Handset cord - connects the handset (receiver) to the telephone body.
2.
Handset (receiver).
3.
FlexSet telephone line cord - connects the phone outlet to the telephone body.
This is a four position modular jack. The two center conductors are the ones used;
polarity is not important.
4.
The FlexSet comes with a preprinted label inserted beneath the faceplate.
Additional blank labels may be purchased from the dealer in Letter or A4 size
paper, as described on page 1-14.
5.
FlexSet Quick Reference Guide (in some markets).
1-1
Coral Terminal Equipment
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the FlexSet 280 and is the answer not in the manual?
Questions and answers