Possible Group Assignments; Parameters Applied To Each Keyset - Tadiran Telecom FlexSet 280 Manual

Station timers ______________________________________________ (Route: ST.T)
Keyset timers ____________________________________________ (Route: EK.T, 0)
Ring Cadence ___________________________________________ (Route: EK.T, 1)
Idle FlexSet Display ________________________________(Route: ROOT, 0, 0, 3)
Fixed System Keys ________________________________________ (Route: SYS)
This option allows programming the four Fixed System Keys for all FlexSets in the
system. The programming is unique to each installation and is done upon request by
the system administrator or buyer.

Possible Group Assignments

Each keyset may be a member of the following groups:
(Route: HUNT)
Hunt Group
(Route: BOSS)
Boss Group
(Route: PICK)
Pickup Group*
Route: BELL)
Bell/UNA Group (
Zoned Voice Page Group
(Route: CALL)
Group Call

Parameters applied to each keyset

The following parameters of the system database are used to assign information
specific to each keyset on a per port basis.
Numbering Plan ___________________________________________ (Route: NPL)
In the pattern numbering plan, each keyset is assigned a dial number. This number
can be modified by choosing ADD or REMOVE and assigning the dial number to a
specific circuit or feature.
Port List _________________________________________________ (Route: PLIS, 0)
Each keyset may be assigned a port name. Two versions of the port name may be
entered for each keyset. Up to five characters may be entered in the short field. The
short name is displayed on FlexSet 120x, EKT, VDK, and DKT1110 station sets. The full
field may contain names up to 16 characters in length, and is displayed on
FlexSet-IP 280S, FlexSet 280x, FlexSet_282S, FlexSet 80x, GKT and DKT2000 sets.
*Can be a member of only one Pickup Group.
(Route: VPZ)
1-11
Coral Terminal Equipment